La roue Fothon est équipée de lumières LED qui s'allument pendant la rotation. Cela améliorera votre aventure de patinage, rendant la nuit comme le jour.
Fabriquée avec un matériau PU durable à très haut rebond, la roue offre des performances de haute qualité avec un roulement rapide et fluide, parfait pour le skate en zone urbaine. Avec les roues Fothon, vous brillerez comme l'étoile de la nuit.
Remarque : Ces roues fonctionnent avec une entretoise de 6 mm, mais les lumières nécessitent une entretoise de 8 mm pour être activées - c'est parce que le générateur de lumière est situé dans le hub de la roue. Les entretoises de 6 mm ne sont pas incluses.
Marta Z.Forest, BelgiqueAcheteur vérifié5 sur 5Nickel 😍😍😍Franz MaixnerTeesdorf, AutricheAcheteur vérifié5 sur 5Tout va bien !!!!joe juppeastbourne, Royaume-UniAcheteur vérifié1 sur 5Awfull quality, avoid,Russell JonesLondon, Royaume-UniAcheteur vérifié5 sur 5These wheels are really good.
The first few miles on them might be a bit slow, because the magnets inside the wheel are a close fit and rub a bit, but they'll soon wear in and they'll feel much better.
They are really bright and they get lots of attention. Plus they illuminate you so its safer too.
Very happy with these wheels.Marek S.Kielce, PologneAcheteur vérifié5 sur 5Bardzo dobry produkt. Szybka realizacja zamówienia. Doskonały sprzedawca i sklep. Polecam wszystkim niezdecydowanym.Kari K.Hämeenlinna, FinlandeAcheteur vérifié3 sur 5Herkät kiville, hieman jäykät johtuen valoista!f. karinele teich, FranceAcheteur vérifié5 sur 5NickelStefan WilliameSchelle, BelgiqueAcheteur vérifié4 sur 5Lichten niet allemaal op maar wel leuk.Alexander H.Harrogate, Royaume-UniAcheteur vérifié5 sur 5Great product, does what it says is does. I have both Blue and Red wheels and I'm very happy with both sets. Couple of notes for others looking at these: (1) You need 6mm to 8mm axle spacers to use these with 6mm axels. (2) The magnetic cores (6 come provided with the 4 wheels) rubs against the inside of the wheel and is gradually worn. This generates fine dust. As skate bearings only have seals on the outside this could cause 'extra' bearing wear as the dust will find its way into the bearing. Will try and report back after giving my bearings their first full service after using these wheels. (3) Bought on sale and wheels arrived with slight discolouration (guessing they were older stock). The wheels have a yellow hue to them, I'm assuming from oxidation of the polyurethane. Hasn't effected the performance or the lighting/flashing of the wheels.marko penttinenRaasepori, FinlandeAcheteur vérifié4 sur 5ok !!!!