Washer

Washer for Swenor roller skis suitable for these models:
- Carbonfibre, Fibreglass, Finstep
- All Alutech models and
- All Skate/Equipe models + Skate Elite

Usage on Carbonfibre, Fibreglass, Finstep: Place on the exterior of the front wheel fork, on the wheel bolt near the front wheel lock nut. This is only necessary on one side (adjacent to the lock nut).

Usage on Alutech models: Apply at the point where the fork connects to the frame via a frame bolt. It should be positioned on one side only (next to the lock nut). Additionally, the washer should be fitted on the exterior side of the front fork, beside the lock nut.

Usage on Skate/Equipe models + Skate Elite: Utilize on the outside of both front and rear forks, in alignment with the wheel lock nuts. It is only required on one side (adjacent to the lock nut).