Scooters
Boards
Skates
BMX
Winter Sports
Apparel
Surf
On Sale
To keep your roller skates and inline skates in excellent condition, different steps must be taken at varying intervals. Appropriate care prolongs the life and enhances the functionality of your skates, making your skating experiences more enjoyable and safe.
This walkthrough provides key advice on maintaining your skates, such as safeguarding, cleansing, and ensuring the wheels and bearings remain in optimal condition. You'll also find suggestions for more detailed resources on specific maintenance techniques.
Overview
Overview
What Is the Best Way to Clean My Skates?
Cleaning techniques for inline skates and roller skates vary by model. For instance, skates with detachable liners can be thoroughly washed, whereas those with integrated liners require a different method.
Hard boots can be scrubbed with more force using a sponge, while soft boots need more delicate treatment.
Thorough Cleaning of Inline Skates or Roller Skates
- Take Skates Apart: Detach the wheels, bearings, and, if feasible, remove the liners.
- Scrub the Boots: Clean hard boots using a sponge with mild soap and water. For soft boots, use a soft cloth and avoid immersing them completely.
- Launder the Liners: If your liners can be detached and washed, adhere to the manufacturer’s directions. Typically, these can be machine-washed with gentle detergent at no more than 30°C (86°F). Allow them to air-dry in a well-aired space, steering clear of dryers to prevent shrinkage and deformation.
- Clean Wheels and Bearings: Use a damp cloth for the wheels. For bearings, refer to this guide: How to Clean and Lubricate Bearings.
How to Wash the Liners of Inline and Roller Skates?
The liner, or inner boot, is often removable for washing. Always follow the maker's care recommendations to prevent damage. If such instructions are unavailable, here’s a general washing method:
- Detach the Liners: Remove any insoles in use.
- Wash the Liners: Use a washing machine with a gentle detergent, keeping the water temperature below 30°C (86°F).
- Air-Dry Liners: Suspend in a ventilated area to dry. Refrain from using a hair dryer.
For skates with non-removable liners, you can't wash them but can apply anti-bacterial shoe sprays to tackle odours. Ensure they're aired well post-use and consider using a boot-dryer if needed.
Quick Methods for Drying Inline or Roller Skate Liners After Washing
To expedite the drying of your liners, fill them with towels or newspaper to soak up excess moisture. Ensure good air circulation in the drying area.
Important: Avoid using a hair dryer or heating devices as these may lead to shrinkage and deformation of your liners.
How to Prevent Unpleasant Odours in Your Skate Liners?
Combating smelly liners involves minimizing bacterial growth, as moist and warm conditions favour bacteria proliferation.
Though preventing odour in skate liners entirely might be challenging, the onset can be delayed.
Effective Ventilation for Skate Liners
Following each skating activity, store your skates in an area with ample ventilation. This helps slow the creation of bad odours caused by humidity and bacteria. If your skates have removable liners, air-dry them. Wash them consistently if washable.
To curb unpleasant smells in your liners, do the following post-session:
- Fully ventilate liners and place them in an airy setting. Always remove your skates from the bag!
- Remove insoles to dry them (if used).
- Consider applying anti-bacterial shoe deodorants.
By adopting these practices, you can maintain fresher skate liners and enjoy sessions free from odour concerns.
When Should Bearings Be Cleaned?
Cleaning and lubricating frequency for bearings depends on how and where you use your skates. Frequent use or skating in dusty or wet areas necessitates more frequent cleaning than skating on smooth and dry surfaces occasionally.
Indicators that bearings need cleaning include:
- Decline in Performance: Cleaning is needed if performance diminishes.
- Odd Noises: Abnormal sounds may suggest dirt or debris inside. Cleaning can extend their lifespan.
If it's time to swap or care for your bearings for improved functionality, we offer supplies and knowledge to either clean existing bearings or replace them with new ones:
- How to Clean and Lubricate Bearings
- Explore Our Range of Bearing Oil and Cleaning Containers
- Explore Our Range of Bearings for Inline and Roller Skates
The Steps to Remove Inline Skate Bearings
Bearings can be removed either with or without special tools. Here are steps to effectively remove bearings.
Begin by detaching your wheels using an allen key to loosen the axles and bolts.
Note: Maintain wheel order for accurate remounting or proper rotation.
Extracting Bearings Without Specialized Tools
An Allen key can be used to pry out bearings. Each wheel has two bearings and a spacer. Ensure prying is on the bearing's edge, not the spacer. Repeat for the other side.
View a demonstration of bearings being removed without a specialized tool.
Extracting Bearings with a Bearing Remover or Blade Tool
Using a bearing remover eases the process without errors. It grips the bearing's edge instead of prying.
Insert the removal tool into the bearing's centre hole and pull at the internal edge.
Many blade tools include a bearing extractor, available here:
Rotating Inline Skate Wheels
Skating involves lateral pushes, often wearing wheels more on one side. To extend wheel life and maintain smoothness, regularly rotate and flip your wheels.
Check wheels for uneven wear. If inner edges are more worn than outer, it's time for a rotation.
Proper rotation extends performance and is crucial for even wear.
Basic Rotation for Four-Wheel Inline Skates
Switch and flip the wheels in a cross-pattern between left and right skates. Number them 1-4, rotating 1-3 / 2-4.
Why Wheel Rotation Matters
Rotating wheels enhances lifespan and promotes even wear. It keeps you rolling smoothly longer before replacement is needed. Flipping to a less-used part of the wheel reduces friction.
While not essential, rotating wheels maximizes utility. For best results, regular wheel rotation is advised!
Essential Tools for Inline or Roller Skate Maintenance
To maintain your skates, you need:
- Hex Key/Allen Key: A fundamental tool for wheel removal, reattachment, and for mounting frames, brakes, and cuffs.
- Blade Tool: Opt for a quality blade tool, equipped with required hex/allen keys and a bearing remover. A compact, versatile choice for travel.
Explore blade tools and more:
Preserving Your Skates with a Skate Bag
When storing skates for extended durations, place them in a cool, dry location away from direct sunlight or extreme humidity. Heat can distort plastic parts, and moisture promotes rust and mould.
A reliable skate bag is beneficial. Designed to securely hold quads or inliners, these bags protect your skates from impacts and scratches with added padding. Plus, a good skate bag or backpack simplifies transporting your skates.
