Steps to Put Together a Pro Scooter

Constructing your very own custom pro scooter is quite challenging. Numerous parts may not be compatible, and improper assembly can lead to damage. This guide offers tips and tricks for assembling your pro scooter.

Stunt scooter components vary in standards, so a universal manual for assembling custom scooters doesn't exist. It's recommended that most users utilize our Custom Scooter Builder tool to ensure compatibility of all parts.

Components of a Custom Trick Scooter

1x Deck	Brake & bolt included unless specified otherwise
1x Fork	Not all forks are compatible with 110mm wheels
1x Bar	Note: oversized bars require oversized clamps
1x Headset	Threadless headsets only fit with threadless forks
1x Compression	Numerous systems are available, with the most common being ICS, HIC, & SCS
1x Set of Grips	Grips typically fit all bars unless noted
1x Clamp	Remember, oversized clamps fit oversized bars
1x Grip Tape	Any choice is fine, but some may require cutting with a utility knife
2x Wheel	Each package contains one wheel unless otherwise specified
4x Bearings	Bearings are compatible with all our wheels unless specified otherwise
2x Spacer (8mm)	Spacers are essential to prevent damage to bearings

Identifying the Components

The model depicted utilizes an ICS system

Tips from SkatePro

Enlist adult assistance during the assembly process
Ensure you are using the correct tool
If inexperienced, budget at least 3 hours for assembly
Select parts from the same brand that are dimensionally compatible
Consider that lightweight parts tend to break more easily than regular ones
It is advised for dedicated riders to opt for a threadless headset paired with a compression system and a threadless fork
Verify contents and compatibility as soon as the package is received before starting assembly (you can return unassembled parts)
Before using the scooter, ensure all screws and nuts are tightened, and regularly maintain the scooter as directed in the manual. Defective parts should be replaced
Over time, slack in the headset is common. Even high-end headsets will eventually begin to make noise. Tightening the compression system often helps
Steer clear of water, sand, moist areas, and excessive failed tricks. ;)

View our video below, which demonstrates the process of assembling a custom scooter.

The video illustrates how to assemble a trick scooter using tools available to most individuals. At SkatePro, professional tools are utilized for tasks such as installing the headset and the crown race.

Let Us Build Your Scooter?

Incorrect assembly of custom scooters is a common issue, often resulting in malfunctioning scooters and quickly worn or damaged parts.

For proper assembly, add custom scooter assembly to your order, and SkatePro will assemble your custom scooter for you.

Return to All about Trick scooter
Go to Custom Scooter Builder