TLC Wedge Phorx Pro Scooter Fork

One-piece pro scooter fork.

28mm thick & 15cm long "closed top" pipe. 5mm hole with threading.

The cap engages internally with the threads of the pro scooter fork. When the clamp on the bars is tightened, the threads "Lock" together.
After this, screw on the compression cap.

The built-in machine starnut allows compatibility with any SCS or HIC; do not use the included shim in this scenario.

Notice:

The shim is specifically designed to fit Phoenix Bars.
To insert the shim, which can be quite challenging, use a large hammer and place wood in between as you tap it in.