Prior to heading out to the slopes with your snowboard, ensuring that your bindings are correctly installed is essential. This concise guide will instruct you on attaching snowboard bindings to your board. The process is relatively simple, and with your gear and a Phillips screwdriver on hand, you’ll be all set. Be aware that snowboard binding systems vary based on the model; this video focuses on the traditional or classic system, where bindings need to be screwed onto the board:
- Position the binding on your board with buckles pointing outward, then open it up.
- Lift the bottom rubber pad to access the place for mounting.
- Insert the mounting disc within the binding.
- A small arrow on the binding will indicate the current angle.
- Rotate the disc to set the desired angle and press it firmly.
- Utilize the markings on the board to align the binding in the suggested position.
- With a large Phillips head screwdriver, tighten the screws in a cross-wise pattern.
- Secure the bindings and repeat these steps for the other binding.
Your bindings are now installed!
