Steps to Attach Scooter Wheels

This video provides a breakdown of the necessary steps for installing scooter wheels onto your setup:

1. First, use two Allen keys to take out the rear axle.
2. Position your wheel and fit it into place.
3. Proceed to push the axle through both the deck and the wheel.
4. Always make sure to apply grease to your bolts!
5. Begin screwing in the bolt with your fingers, then secure it tightly with two Allen keys.
6. The wheel should spin freely without any lateral movement.
7. Next, remove the front axle.
8. Place the wheel spacers into the fork and insert the wheel.
9. Slide the bolt through the fork and the wheel.
10. Finally, insert the nut and start tightening it down.

Your wheels are now successfully mounted!