Installing an IHC Scooter Bar: Step-by-Step Guide

This video will walk you through the process of attaching an IHC scooter bar. You'll only need an Allen key. Just adhere to the instructions in our video, and you'll be all set!

1. Begin by taking the shim out of your clamp.
2. Then, push the clamp onto the bar, followed by sliding it onto the fork.
3. At this point, turn your scooter upside down and start aligning the bar, clamp, and fork.
4. Ensure that your bar, clamp, and fork are all oriented in the same direction.
5. The final step involves tightening all components together.
6. When you are tightening the screws, alternate them to apply even pressure.

Your IHC bar is now installed!