Steps for Installing Turnamic IFP Bindings

This video tutorial guides you through the installation of Turnamic bindings on IFP plates. This system requires you to slide the bindings onto the mounting plate:

1. Begin by attaching the rear section of the binding to the front section.
2. Adjust it to match your boot size accordingly.
3. Then, use the small switch on the front piece to unlock the binding.
4. After that, slide the binding onto the mounting plate.
5. It is necessary to install both the front and rear sections simultaneously.
6. At this point, you can modify the binding's position.
7. Finally, secure the binding in place by locking it.

The bindings are now successfully mounted!