Guidelines for Installing BMX Tyres and Inner Tubes

Watch this video to gain an understanding of the procedure for installing BMX tyres and an inner tube:

  1. Begin by inflating the inner tube slightly.
  2. Take note of the direction in which the wheel should rotate.
  3. Initiate the process by mounting the wheel onto the tyre.
  4. Ensure there is a space between the wheel and the tyre.
  5. Following that, place the valve through the wheel's hole.
  6. Proceed to install the tube.
  7. Attach the remainder of the tyre afterwards.
  8. Check that the valve maintains a straight position.
  9. Attach the pump head subsequently.
  10. Inflate the tyre to the pressure level advised on the tyre itself.
  11. Secure the cap by screwing it on.

Your BMX tyres are now successfully installed!

SkatePro